Application Form for Debugging Inverter VRF Air Conditioning Unit (Filled by Installer)
Full name of the installer:___________________________________________________________
Address of the installer:____________________________________________________________
Owner's name or employer:_________________________________________________________
Person to contact:_______________________________Tel:______________________________
Installation site:_________ Province _________ City ____________________________________
Unit model: ___________________________
IDU bar code:___________________________
ODU bar code:___________________________
Distributor:________________________
Person to contact:_________________________
Tel:______________________________
Fax:____________________________________
Installer:__________________________
Person to contact:_________________________
Tel:______________________________
Fax:____________________________________
The following items are to be filled by the installer correctly and faxed to TICA Factory 400 Center 48 hours
before boot debugging, so that the debugging can be arranged in due time.
Fax:
862585323095
;
Tel:
4008601601
In case the form contents are different from the real situation, causing the experts unlikely
to conduct debugging on site, the installer must be liable for labor and travelling expenses incurred to the
debugging experts.
Contents to be Checked and Confirmed by Installer
Before installation, ask the installer to carefully read through the manuals and relevant requirements
attached to the unit.
1.
Check installation position
a. Whether heat dissipation and ventilation for ODU meets requirements for distance Yes ( )
No ( )
b. Whether ODU is installed on a base firmly and with vibration damping measures
applied
Yes ( )
No ( )
c. Whether IDU is provided with vibration damping measures and properly fastened Yes ( )
No ( )
d. Whether there is space for maintenance
Yes ( )
No ( )
2.
Check electrical system before installation
Yes ( )
No ( )
a. Whether air switch capacity and power wire diameter meet unit requirements
Yes ( )
No ( )
b. Whether correctly wired and whether wiring terminal is pressed and completely
connected
Yes ( )
No ( )
c. Whether neutral line and grounding wire are connected in accordance with
electrical codes
Yes ( )
No ( )
d. Whether the distribution of control wire and power wire meets anti-interference
requirements
Yes ( )
No ( )
e. Whether the length of control wire and power wire is proper
Yes ( )
No ( )
3.
Check refrigerating system before installation
Yes ( )
No ( )
a. Whether refrigerant duct meets factory requirements in terms of its diameter and
thickness
Yes ( )
No ( )
b. Whether the length of refrigerant duct meets relevant requirements
Yes ( )
No ( )
c. Whether added nitrogen for welding refrigerant duct to protect air conditioning unit Yes ( )
No ( )
d. Whether cleaned refrigerant duct
Yes ( )
No ( )
e. Whether used nitrogen for holding pressure to test leakage
Yes ( )
No ( )
f. Whether vacuumized refrigerating system against installation manual
Yes ( )
No ( )
g. Whether supplemented refrigerant according to standard
Yes ( )
No ( )
Содержание TIMS-X Series
