![TIA WAVEJET 400-1338-02 Скачать руководство пользователя страница 42](http://html.mh-extra.com/html/tia/wavejet-400-1338-02/wavejet-400-1338-02_component-maintenance-manual-with-illustrated-parts-list_1114056042.webp)
WAVEJET MICROWAVE OVEN
COMPONENT MAINTENANCE MANUAL
WITH ILLUSTRATED PARTS LIST
25-30-43
Page 602
March 15, 2003
Since the introduction of the Wavejet Microwave Oven, there have been
configuration changes to the Turntable Motor, Shaft Coupler, and Turntable
Support due to the obsolescence of purchased parts. The following is an
explanation of these changes and how to identify the configuration of these
parts as installed on the Wavejet.
(1) Units manufactured after serial number 02-2-30614 inclusive. The Turntable
Motor (670), Shaft Coupler (685) or Turntable Support (210) may be ordered
from Figure 1001 and 1002 with full interchangeability.
(2) Units manufactured before Serial Number 02-2-30614. If a replacement
Turntable Motor (670), Shaft Coupler (685) or Turntable Support (210) is
needed, perform the following check
BEFORE
ordering Parts. Remove Shaft
coupler by grasping and firmly lifting upwards. Inspect the bottom of the
shaft coupler where it connects to the turntable motor.
(a) If the shaft coupling is shaped like a “+” as shown in View B,
replacement Turntable Motors (670) may be ordered with full
interchangeability, but replacement Shaft Couplers (685) and
Turntable Support (210) must be ordered in sets.
(b) If the shaft coupling is shaped like that shown in View A and the
Turntable Motor (670), Shaft Coupler (685) or Turntable Support
(210) need to be replaced, all three parts must be installed as a set if
any one of the parts need to be replaced.
View A
View B