27
2.
Click
OK
.
The next step is to add the network hubs to your classroom network.
3.
If you selected
Type 1 hubs
, skip to the section “Activating Type 1
network hubs” on page 31
Activating Type 2 network hubs
Use these instructions only if you selected
Type 2
while identifying your
hardware.
With the Network Setup wizard running, you must reset each hub and
wait for the software to recognize each hub on the network.
TI-Navigator™ is designed to communicate with a maximum of 11 hubs
per access point; more than 11 hubs are not supported.
1.
Before you begin, count the number of network hubs in your
classroom so that you will know when all of them have been
associated with the access point.
2.
Click
Next
to begin activating the network hubs.
InstallationGuide.book Page 27 Wednesday, May 3, 2006 10:19 AM
