Thuraya XT 01, Руководство пользователя

Страница: 32 / 95

26
Getting started
01
02
03
04
Handling more than one call simultaneously
(Conference calls)
Incoming call:
When Party1 is receiving a call from Party3, while talking with Party2,
Party1 can ‘accept; or ‘reject’ the call from Party3. If the call is rejected,
the conversation between Party1 and Party2 is not affected. If the call is
accepted, Party2 is put on hold and Party1 is connected to the call from
Party3. Using the option menu, Party1 can swap over Party2 and Party3,
or operate a multi-party call up to 6 users including Party1.
Outgoing call:
If Party1 wants to make a call to Party3, while talking with Party2,
using the option menu puts Party2 on hold and enters Party3’s phone
number.
To include Party2 in the conversation with Party3, select
Multiparty
call
from the option menu. Party2 and Party3 can be swapped over. Up to
6 users including Party1 can have a conversation simultaneously.
Connect a private call:
You can isolate a party from the multiparty call and talk
exclusively with this ‘
private call
’. The other parties of the
conference will be put on hold and will not hear what you are
speaking with the
private
party. You can only have up to two
active calls at one time. Therefore you can select Private only if
your second line is not busy with another call.
End one call:
You can selectively end only one of the connections during a
multiparty call.
End all calls at once:
Ending all calls in one step terminates the multiparty call.
All parties will be disconnected from each other and they will hear
the tone for ‘
line busy
’.
Main Menu:
During a call you can use most of the functions of the Main menu
such as sending DTMF signals, reading/writing SMS.
However, some functions may not be available.