THUNDER LASER
NOVA-51
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
No.197, Hudong Road, Shatian Town,
Tel :(86)769 826653
Dongguan, Guangdong, China
58
4. Before you mount the object into the rotary axis attachment, measure the diameter of
the object at the position to be engraved with a sliding caliper or a similar tool. Write
down this value. For example:80
5. Adjust and fix the slider to make the work piece fitting into the rotary axis attachment.
6. Once the rotary is plugged in and switched on the y axis, y-axis will be inoperable by
jog control and will have to be gently moved by hand in and out of position above the
rotary axis attachment. Any reset of the controller or repowering of the machine will
start the homing function. The x-axis will head off to towards its limit switch and y-axis
now controlling the rotary will just spin for while before timing out and setting a zero
point. Be very aware
Set your focus manually, carefully and safely. It is not recommended to use the auto
focus with a rotary axis attachment for the simple reason that you are not working with
a flat object. Set your origin
7. Generate a graphic with the help of the graphics software. The graphics size must be
adjusted until less than the dimensions of the work piece.
8. Select
“Output”, and then input the diameter of the object and the circle pulse. Like
below: