THUNDER LASER
NOVA-51
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
No.197, Hudong Road, Shatian Town,
Tel :(86)769 826653
Dongguan, Guangdong, China
17
3.2 Location
Before you install the laser system, you should select an appropriate location. Follow the
guidelines shown below:
1.
Avoid locations where the system is exposed to high temperatures, dust and high
humidity. (The humidity must not exceed 70% and the temperature must not be close
to the dew point.)
2.
Avoid locations, where the system is exposed to mechanical shocks.
1.
Fuse protection:
Do not connect other devices via the laser fuse, as the laser system requires the full
amperage.
Tips
:
1. Avoid locations with poor air circulation; select a location close to ventilation (if
available).
2. Select a location, whose room temperature is between 15 °C and 25 °C (59°
– 77° F).
This is fundamental to maintain consistent and reliable operation of a CO2 laser, Metal
RF or Glass tube and the machine itself.
Avoid higher ambient temperatures and strong exposure of the engraver to the sun.
Use blinds, if required.
3. Mechanical shock and vibration of the laser will have detrimental effects on the
performance and life expectancy of the machine. It will manifest (over a period of time)
with a noticeable decrease in performance and increased maintenance required,
possibly even damage. Setting your Thunder Laser up in s suitable temperature
controlled, dust free, moisture free, level, stable surface (a level concrete floor) with
the recommended extraction is critical to the ongoing performance of the machine. It
is also a warranty condition.
