THUNDER LASER
NOVA-51
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
No.197, Hudong Road, Shatian Town,
Tel :(86)769 826653
Dongguan, Guangdong, China
30
This door is locked by using two outside locks.
9. Honey comb table
The honey comb plate to be processed is put onto the working table. Put the material
on the working table for engraving & cutting
10. Y-axis
The motion system is that performs the mechanical movements in Y direction. The
Y-axis is visible in the working area.
11. Front up door
Open this door for take out the honey comb table and it
’s convenient to put that
material on working table
This door is locked by using inside screws and outside locks.
12. Flap protection sensor
This is where Open flat protection exist. Laser will stop working once the cover is
opened during working.
13. Control panel
You can control the X-axis, Y-axis and Z-axis manually by the display panel, it also
shows the working time, power, speed and the whole working time and affords many
function options(please view this chapter 4.3 for detail).
14. Emergency stop switch
Once there
’s an accident happen (laser catch fire, laser out leakage) during working,
please turn off this switch immediately. It will be cut off the laser power and motion
power immediately.
15. LED lamp
It
’s used for lighting the working table once turn the Main switch on.
16. Laser power switch
The laser power will be on while you turn it on
17. Main power switch
The laser machine will be start while you turn it on
18. Ethernet port
This Ethernet port is for connecting computer.
19. U-disk connection port(USB)
You can save the file as a U-disk File by press
“SaveToUFile” on the software, then
save it to the u-disk and insert the u-disk to the port of laser machine, then use the
control panel to select and control it to work
