USERS MANUAL MINI 60
D ONGGUAN T HUNDER L ASER E QUIPMENT C O.,LTD
S hatian To wn, S h atian Da dao, M intian
Tel :(86)769 826653
Do ngguan C i ty, G uangdong P r ovince, China
57
More details for how to use software please watch the instruction video below.
https://www.thunderlaser.com/video/how-to-use-your-laser-software.html
6. Click “Original” and “Frame” on the display, please make sure that the material is in the
right location and there is enough space for working.
①
Control arrow button to move the laser head;
②
Click “Origin” button to select the start point;
③
Click “Frame” button to be sure the working area;
④
Click “Start-Pause” to run the program;
7. Please check the water cooling system is working properly; the water is running into
and filling the laser tube. Please do not start your work if the laser tube isn’t full of water,
because that may led to laser tube damage due to the high temperature.
8. Finally press the “Start-Pause” button in the display, to start the engraving process.
9. While the laser is engraving, you can generate the next graphic.
10. When the engraving is complete, the laser machine will give out the notification
sound and the laser head will go back to the original point, and the warning light will
return to the green light, then you can repeat engraving.
This is software specific, so if you are using LightBurn, you will need to
do this in LightBurn. It is called “Scanning Offset Adjustment.”
