USERS MANUAL MINI 60
D ONGGUAN T HUNDER L ASER E QUIPMENT C O.,LTD
S hatian To wn, S h atian Da dao, M intian
Tel :(86)769 826653
Do ngguan C i ty, G uangdong P r ovince, China
13
2.3 Safety Precautions when Operating the Device
Your Thunder Laser MINI60 SERIES has an integrated safety system which immediately
stops the job when the protection cover (Lid) is opened. An incomplete job will occur if
the cover is opened during operation. Press the "PAUSE" button first if you want to
interrupt an engraving process.
Please remember the following safety precautions when working with this device:
1. CO2 Fire extinguishers should be placed near laser. Always keep a
properly maintained and inspected fire extinguisher on hand.
2. Do not store any flammable materials in the inside of the device.
Particularly leftovers of produced materials have to be removed to
prevent fire hazard.
3. Please maintain free airflow around this system at all times. Do not
cover the machine while in operation.
4. Stay with the laser. Do not leave the laser unattended when it is
working, small scraps can ignite and without supervision can destroy the
machine if not checked.
5. Use Air Assist. Always use the system’s Air Assist feature when vector
cutting.
1. These lasers emit invisible radiation; safety glasses should be worn
when maintaining these machines for your protection.
2. Adjustment of the beam path must be performed only by specially
trained personnel. An improper setting can lead to uncontrolled
emission of the laser radiation.
1. Do not disable limit switches or safety features as this can invalidate
warranties and cause damage to you and the machine.
2. Before processing materials the user must verify whether harmful
materials can be generated and whether the filter equipment of the
exhaust system is suitable for the harmful materials. We emphasize
that it is the responsibility of the user, to consider the national and
regional threshold values for dust, fogs and gases when selecting the
filters and the exhaust system. (The values for the maximum workplace
concentration must not be exceeded.)
3. PVC (polyvinyl chloride) must under no circumstances be processed
with the laser.
