USERS MANUAL MINI 60
D ONGGUAN T HUNDER L ASER E QUIPMENT C O.,LTD
S hatian To wn, S h atian Da dao, M intian
Tel :(86)769 826653
Do ngguan C i ty, G uangdong P r ovince, China
43
MaxPower1
：
%
Modified press Enter
30.0
MaxPower2
：
Press Z/U move item
%
30.0
Layer0
：
MinPower1
：
%
22.0
MinPower2
：
%
30.0
Speed
：
mm/s
400
4.4.6 Menu button
The Menu button can be pressed when the system is idle or the work is finished. On
pressing this button, it will show some entries in the following interface:
U Move: When the green block is on “U Move” item, to control the rotary
attachment to turn by pressing left and right arrow button.
Axis Reset+
:
When the green block is on this item, you can manually reset the
axis if needed.
Set default para
:
To recover all manufacturer parameters and user parameters
for your machine
Auto Focus
:
To use the auto focus function.
Language: The item “Language” helps you to select a appropriate langue which
is displayed on the panel:
IP Setup: The machine is already assigned an IP address as
192.168.1.100,and the IP address on software should be the same while
communicate
Diagnoses
:
the “Diagnoses” interface shows some system input information,
such as limiter status, the status of the water protecting, and the status of the
door protection etc.
