Thrane&Thrane tt-3022d, Руководство по установке

Страница: 96 / 131

System Installation System Installation System Installation System Installation TT-3042D Remote Alarm / Printer Unit TT-3042D Remote Alarm / Printer Unit TT-3042D Remote Alarm / Printer Unit TT-3042D Remote Alarm / Printer Unit
Page Page Page Page 3-58 3-58 3-58 3-58 25Jul00 25Jul00 25Jul00 25Jul00
Position Setting Fact.
Address
1-3 off,off,off: 1 1
off,off,on: 2
off,on,off: 3
off,on,on: 4
on,off,off: 5
on,off,on: 6
on,on,off: 7
on,on,on:
1. 83
Printing Direction
4 on: Reverse off
off: Normal
Sounder Timeout
5 on 10 sec. Timeout
off no timeout off
NMEA/Aux.Port
6 on: NMEA 01834 NMEA
off: Serial data5
Dot Energy
7 on: High High
off: Normal
Printing Width
8 on: 40 Chars per line 80
off: 80 Chars per line
Table 35 TT-3042D DIP switch settings.
3 When this address is selected the TT-3042D is configured as local
printer. This address should not be used if a TT-3608A Hard Copy Printer
is connected to the TT-3022D transceiver.
4 Jumper W2 and W9 should be in position 1-2 (low) in Rx mode to
achieve optical isolation, else position 2-3 (high).
5 Jumper W2 and W9 must be in position 2-3 (high).