manualshive.com logo in svg

Thrane&Thrane Thrane IP Handset, Руководство пользователя

Поделиться
Скачать
Thrane&Thrane Thrane IP Handset Скачать руководство пользователя страница 4

Disclaimer

Any responsibility or liability for loss or damage in connection with the use of this 
product and the accompanying documentation is disclaimed by Thrane & Thrane. The 
information in this manual is provided for information purposes only, is subject to 
change without notice and may contain errors or inaccuracies. 

Manuals issued by Thrane & Thrane are periodically revised and updated. Anyone 
relying on this information should acquire the most current version e.g. from 

thrane.com

 

or from the distributor

.

 

Thrane & Thrane is not responsible for the content or accuracy of any translations or 
reproductions, in whole or in part, of this manual from any other source.

Copyright

 © 2011 Thrane & Thrane A/S. All rights reserved.

Trademark Acknowledgements:

•

Thrane & Thrane

 is a registered trademark of Thrane & Thrane A/S in the European 

Union and the United States.

•

Inmarsat

 is a registered trademark of the International Maritime Satellite 

Organisation (IMSO) and is licensed by IMSO to Inmarsat Limited and Inmarsat 
Ventures plc. 

•

Inmarsat’s product names are trademarks or registered trademarks of Inmarsat.

•

Windows

 and 

Outlook

 are registered trademarks of Microsoft Corporation in the 

United States and other countries.

•

Other product and company names mentioned in this manual may be trademarks or 
trade names of their respective owners.

Содержание Thrane IP Handset

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды