Thrane&Thrane Thrane IP Handset, Руководство пользователя

Страница: 36 / 152

Chapter 2: Getting started
24 Establishing a connection using BGAN terminal
IP Handset ready
When the display shows the handset ready symbol in the upper right
corner, the handset is ready for making a call.
If the handset ready symbol is crossed out you cannot make a call. The
display will normally show a message explaining why the handset is not
ready.
Changing user name and password for an IP Handset
If the start up option Auto BGAN SIP is selected, an IP Handset that is
connected to the terminal Automatically gets the first available user name
(local number) and password. If you want to change the user name or
password, you need to set up the user name, password and local number in
two places:
• In the IP Handset
• In the web interface of the BGAN terminal.
To enter user name and password in the IP Handset
To enter the user name and password in the IP Handset, do as follows:
1. Start up the handset as described in the previous sections.
2. Enter the menu system and select SIP .
3. Move to the BGAN profile and select Options (left select key).
4. Select Edit/View .
5. Select User name and enter the user name for your handset. Note that the
user name must be the same as the local number for your handset when
using the BGAN terminal. Available numbers are 0501 to 0516.
Note
Make sure you have disabled Auto BGAN SIP under Settings > Start
up options . Otherwise the information entered below is not used at
next startup!