Thrane&Thrane SB5006, Руководство по эксплуатации, Страница: 9 / 38

7
3 Using the Service Interface
Once the cable connections between the VHF equipment, the SB5006 Service tool and the
PC has been established, call up the HTML browser and type the IP address defined for the
Service tool (factory set default http://169.254.86.86 or lanbox) in the address field. The
Service Interface index page should appear (see Figure 3.1).
Figure 3.1: The index page is the common link for the service tool user interface. The index page
is the menu list in the left area, always available regardless of the page loaded.
The page shown is the front page that will always be displayed when “lanbox” or numeric IP
address is entered in the browser address field, or when the system reboots after a software
upload.
The “VHF Radio” field contains the following information of the VHF 5000 series radio:
• Line 1 – Software Main Release version
• Line 2 – Boot monitor version (only pre-programmable from factory)
• Line 3 – DSP code version (sub-version of the main release)
This information is also available from the menu system in the radio. If the version informa-
tion does not appear in the “VHF Radio” field after 20 seconds, the connection may have
been lost. Please refer to Appendix – Troubleshooting.
0725