Thrane&Thrane SB5006, Руководство по эксплуатации, Страница: 21 / 38

19
Figure 4.15: Default settings for the SB5006 service tool.
A – For normal use the Auto negotiate bullet should be checked.
4.2 Service Level
This level defines a restricted area for setting of system parameters that is usually only
required following specific repair actions applied to the VHF radio or if special setting of
certain system parameters is required. Accessing the restricted area subsequently allowing
for the possible changing of the system parameters, should be done only after careful
considerations.
All data, configurations and settings that exist in the radio reside in the base band control
board FLASH memory. If the base band control board has been replaced with a new board in
the radio it is necessary to re-establish the radio identity. Having re-established the radio
identity it is further necessary to review/configure data described in the section “Configura-
tion level”.
The System Parameters page is password protected. Click on the Login menu item on the
index page. Type the password and click on login.
0546