Thrane&Thrane Capsat TT-3060A, Руководство пользователя

Страница: 56 / 182

Call Types
Page 4-20
12Oct01
Sending successful
successful
Sending
Clear the call (Fax placed on-hook)
0:02:24
Call logged
Press the Hook-key on the fax keypad to get a proceed-to-dial tone.
Secondly the dial number must be entered and ended with the
-
key to start the call.
If the call is accepted by the Capsat® Telephone it will start the call
procedure and display the message 'Fax calling'.
When the Capsat® Telephone has established the call to the LES the
message 'Fax-LES connected' will be displayed. The LES now calls the
subscriber fax.
When the called fax answers the call the message 'Fax-Fax connected'
will be displayed.
Press the Start-key before or when you get connection with the called
fax machine. Some fax machines only allow 5 or 6 ringing sequences
from the Start-key is pressed and until the call must be answered. In
this case you must wait to press the Start-key until the call is being
answered.
If the Start-key is not pressed the message ‘Press Start on fax’ will be
displayed. If the Start-key is not pressed immediately after this
message the fax call will be cleared.
The billing of the call starts when the called fax machine answers the
call and there is an end-to-end connection between fax machine on
the Capsat® Telephone and the called fax machine.
The fax machine will automatically clear the connection when the fax
message has been sent.
If the call is billed, payment information is stored in the call log and
the call duration is displayed for some seconds in the display.