Thrane&Thrane Capsat TT-3060A Скачать руководство пользователя страница 145

Страница: 145 / 182

Appendix F - List of Cause Codes

12Oct01

Page F-5

No SCPC carrier (12C6)

Call cleared by the LES because no SCPC carrier was detected
from the MES during the call setup.

Not installed (1180)

Incoming call cleared by the MES because the call was address to
a terminal (different from handset, aux phone, fax, data) not
available by the MES.

Premature call clear (1641)

Call cleared prematurely by the user (on-hook, hang-up) while
setting up the SCPC channel.

Repoint antenna (1363)

Call cleared by the MES because the user commands the
MES/antenna into another ocean region.

SCPC channel not avail. (1158)

Call cleared by the NCS because no SCPC channels are currently
available.

Service not available (1185)

Call cleared by LES. Service not provided at this LES.

Service not available (1195)

Call cleared by LES. Service temporarily not available at this LES.

SIM PID conflict (16D1)

Call cleared by the LES because the SIM card has a different
identify than expected (replace of SIM card with another without
LES knowing ?).

SIM PID invalid (15A5)

Call cleared by the LES because the SIM card is not authorised for
any service at this LES.

SIM service invalid (16A5)

Call cleared by the LES because the SIM card is not authorised for
the requested service at this LES.

Spot beam id invalid (11D2)

Call cleared by NCS. Spot beam ID in call setup invalid.

Terr. i/f congested (1154)

Call cleared by LES. Terrestrial circuits are congested.

Содержание Capsat TT-3060A






















































































































































































Результаты поиска

Содержание Capsat TT-3060A

Отзывы:

Похожие инструкции для Capsat TT-3060A

Бренды по названию

Популярные бренды

Thrane&Thrane Capsat TT-3060A, Руководство пользователя

Результаты поиска

Содержание Capsat TT-3060A

Отзывы:

Похожие инструкции для Capsat TT-3060A

Бренды по названию

Популярные бренды