manualshive.com logo in svg

THORLABS SP USB Series, Руководство по эксплуатации

Поделиться
Скачать
THORLABS SP USB Series Скачать руководство пользователя страница 7

5

General Information

© 2008    Thorlabs

1

General Information

1.1

Safety

G

Attention

G

All statements regarding safety of operation and technical data in this

instruction manual will only apply when the unit is operated correctly as it

was designed for.

All modules must only be operated with proper shielded connection cables.

Only with written consent from 

Thorlabs

 may changes to single

components be carried out or components not supplied by 

Thorlabs

 be

used.

This precision device is only serviceable if properly packed into the

complete original packaging including the plastic foam sleeves. If

necessary, ask for a replacement package.

1.2

Introduction

The SPx-USB is a family of spectrometers that is designed for general laboratory
use. Integrated routines allows averaging, smoothing, peak indexing, as well as
saving and recalling data sets.
The initial setup is simple to complete. Following installation of the software, the
SPx- USB is ready to use. Simply plug it into a USB 2.0 port and run the
application software SPLICCO. The remainder of this manual is devoted to the
setup procedure and features of the fiber spectrometer. A troubleshooting section
and detailed specifications of the various components are provided to further
assist.

1.3

Application software SPLICCO

SPLICCO is an acronym for "spectrometer and line camera control". This
software can be used for aquiring direct, transmittance and absorbance
measurements in conjunction with Thorlabs line cameras and spectrometers.

After the installation the software is able to communicate with all Thorlabs LC1
line cameras and all SPx spectrometers. Additionally, there are two virtual
devices: a line camera and a spectrometer, to demonstrate the functionality of
SPLICCO.

Содержание SP USB Series


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды