THORLABS SP USB Series, Руководство по эксплуатации

Страница: 62 / 65

60 Splicco
© 2008 Thorlabs
Figure 12 Install driver software
Figure 13 New device was found
Figure 14 The Found New Hardware Wizard
Figure 15 Choosing the installation mode
Figure 16 Selection of the correct driver
Figure 17 Finishing the New Found Hardware Wizard
Figure 18 Device menu
Figure 19 Device selection
Figure 20 The integration time control
Figure 21 Device properties
Figure 22 Setting the average mode
Figure 23 The average scans control
Figure 24 The smoothing controls
Figure 25 The box smoothing algorithm
Figure 26 The flip and revert picture controls
Figure 27 The display mode control
Figure 28 Scope mode
Figure 29 Relative difference mode
Figure 30 Absorbance mode
Figure 31 Transmittance mode
Figure 32 Right click menu
Figure 33 Peakfinder
Figure 34 Using the peak finder
Figure 35 Export peaks dialog
Figure 36 Right click menu
Figure 37 Device window in cursor mode
Figure 38 Save Measurement / Reference Data
Figure 39 Export data as CSV
Figure 40 File dialog
Figure 41 Load reference file
Figure 42 Add reference
Figure 43 Import a CSV file
Figure 44 Editable axis
Figure 45 Color setup
Figure 46 Device trigger properties
Figure 47 Running data loop
Figure 48 Stopped data loop
Figure 49 Software single shot mode
Figure 50 Arming the external trigger
Figure 51 Waiting for an external trigger
Figure 52 Calibration tabpage
Figure 53 Wavelength calibration window
Figure 54 Persistence settings
Figure 55 Gauss-Transformation settings
Figure 56 Virtual device settings
Figure 57 Virtual device description file
Figure 58 Error message in case SPLICCO was not installed
Figure 59 Error message in case VISA runtime was not found
Figure 60 SPx -USB dimensions
Figure 61 Crossed out "Wheelie Bin" symbol