THORLABS SC10 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 12

THORLABS SC10 Скачать руководство пользователя страница 6

8654-D02 Rev. B 8/15/05

Page 6 of 12

Main Display

The front panel contains six keypads that can be used for various functions and navigating through
the display.

The Main display screen contains four display windows, each is located in a quadrant of the display.
The windows are

MODE

,

TRIGGER

,

TIME OPEN

, and

TIME CLOSED

. The keypads will modify

(edit) the active quadrant which is indicated by a “

_

” next to the quadrant. The

SELECT

key is used

to move between quadrants.

MODE

When the active window indicator is in the

MODE

quadrant (upper right) the

▲

▼

keys will sequence

through the modes

SINGLE, AUTO

,

MANUAL

,

X GATE

, and

REP

.

SINGLE

– In the single event mode the shutter will open and close at the occurrence of each

trigger using the parameters displayed in the (open/close) time windows.

AUTO

– In the automatic mode the shutter will continually open and close after a single event

using the parameters displayed in the (open/close) time windows.

MANUAL

- In manual mode, the displays in the other quadrants will blank and the

ENABLE

key

will toggle the operation of the shutter.

X GATE

- In the external gate mode the other displays will blank and the control of the shutter

will follow the signal on the input trigger BNC connector on the rear panel. The shutter will be
open when the signal is active high (TTL). The shutter will be closed when active low (TTL).

REP

– In the repeat mode the open/close time sequence will be executed the number of times

shown next to the REP display. The unit may be programmed to repeat the cycle anywhere
between 1 and 99 times. While the active display is in the REP mode the number of events may
be modified by using the

◄

key to place the curser under the number displayed and using the

▲▼

keys to increment or decrement the number. The repeat sequence begins with activation of

a trigger.

TRIGGER

When the active window indicator is in

TRIGGER

quadrant (lower right) the

▲

▼

keys will sequence

through the trigger options

INT

,

EXT

.

INT

- In the internal mode pressing the

ENABLE

key activates or enables the operation of the

shutter as per the selected mode and timing parameters. While the shutter controller is executing
a sequence (actively running) the “ENABLED” indicator will illuminate on the front panel. In all
modes of operation pressing

ENABLE

key while the unit is “enabled” will disable the shutter.

EXT

– In the external trigger mode a rising edge on INPUT TRIGGER BNC input will start

execution of the parameters programmed on the unit. The unit will respond to the external trigger
after the

ENABLE

key is pressed. When enabled the “ENABLED” indicator will illuminate on the

front panel. In all modes of operation pressing

ENABLE

key while the unit is “enabled” will

disable the shutter.

TIME OPEN (ON)

When the active window indicator is in

TIME OPEN

quadrant (upper left) the

▲

▼

keys will increment

and decrement the indicated digit. The

◄►

keys will move between digits. This indicates how long the

shutter will be open (when the shutter is not connected it indicates the “high” time of the TTL output
trigger).

«
...
4
5
6
7
8
...
»

Содержание SC10













Отзывы:

Нет отзывов