THORLABS Redstone OSA305 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 52

background image

Optical Spectrum Analyzers

Chapter 3: Warranty

Page 3

STN053070-D02

Chapter 3

Warranty

Thorlabs warrants material and production of the Redstone OSA305, OSA201C, OSA202C, OSA203C,
OSA205C, and OSA207C for a period of 24 months starting with the date of shipment. During this warranty
period, Thorlabs will see to defaults by repair or exchange if the product is entitled to warranty. For warranty
repairs or service the unit must be sent back to Thorlabs or to a place determined by Thorlabs. The customer
will carry the shipping costs to Thorlabs; in case of warranty repairs Thorlabs will carry the shipping costs back
to the customer. If no warranty repair is applicable, the customer also has to carry the costs for return shipment.
In case of shipment from outside, EU duties, taxes, etc., that may arise have to be carried by the customer.

Thorlabs warrants the hardware and software determined by Thorlabs for this unit to operate fault-free provided
that they are handled according to our requirements. However, Thorlabs does not warrant a fault-free and
uninterrupted operation of the unit, of the software or firmware for special applications, or this instruction manual
to be error-free. Thorlabs is not liable for consequential damages.

Please visit the below link for Thorlabs’ General Terms and Conditions:

https://www.thorlabs.com/Images/PDF/LG-PO-001_Thorlabs_terms_and_%20agreements.pdf

3.1.

Restriction of Warranty

The aforementioned warranty does not cover errors and defects as a result of improper treatment, software or
interface not supplied by Thorlabs, modification of product, unauthorized maintenance, or misuse or operation
outside the defined ambient stated by Thorlabs.

Further claims will not be consented to and will not be acknowledged. Thorlabs does explicitly not warrant the
usability or the economical use for certain cases of application.

Thorlabs reserves the right to change this instruction manual or the technical data of the described unit without
notice.

«
...
5
6
7
8
9
...
»

Содержание Redstone OSA305





















































Отзывы:

Нет отзывов

Похожие инструкции для Redstone OSA305

Бренд: Raith Страницы: 26

Бренд: Kane Страницы: 16

Бренд: Daktronics Страницы: 30

Бренд: DAKOTA ULTRASONICS Страницы: 28

Бренд: h/p/cosmos Страницы: 81

Бренд: GE Страницы: 18

Бренд: Össur Страницы: 98

Flex Foot Cheetah

Бренд: Össur Страницы: 107

Бренд: Össur Страницы: 38

Бренд: Össur Страницы: 39

Bionic Symbionic Leg

Бренд: Össur Страницы: 2

Бренд: Össur Страницы: 67

Бренд: Össur Страницы: 17

i-Digits Access

Бренд: Össur Страницы: 231

Бренд: VaBroom Страницы: 4

Avisa Line XL04

Бренд: FHF Страницы: 2

Бренд: Joerns Healthcare Страницы: 106

Бренд: Nolangroup Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды