3
PRM1-Z7 Series Motorized Rotation Stages
1.2 Warnings
•
The equipment has been designed to operate normally under the following environmental
conditions :-
Location
Indoor use only.
Max altitude
2000m
Temperature range
5°C to 40°C
Maximum humidity
Less than 75%
•
When siting the equipment, care should be taken to ensure that proper airflow is
maintained to the motor.
•
If this equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired. Do not operate the instrument outside its
rated supply voltages or environmental range. In particular, excessive moisture may
impair safety.
•
Translation stages can be made to move without warning. Ensure that the stages can
move their full travel range without risk of fouling on external objects. All cables should
be routed to avoid the risk of them becoming entangled.
1.3 Declarations Of Conformity
1.3.1 For Customers in Europe
This equipment has been tested and found to comply with the EC Directives
89/336/EEC ‘EMC Directive’ and 73/23/EEC ‘Low Voltage Directive’ as amended by
93/68/EEC.
Compliance was demonstrated by conformance to the following specifications which
have been listed in the Official Journal of the European Communities:
Safety
EN61010: 2001 Installation Category II, Polution Degree II.
EMC
EN61326: 1997
1.3.2 For Customers In The USA
This equipment has been tested and found to comply with the limits for a Class A
digital device, persuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Changes or modifications not expressly approved by Thorlabs Ltd could void the
user’s authority to operate the equipment.
