THORLABS PRM1-Z7 Series, Руководство пользователя

Страница: 13 / 20

11
PRM1-Z7 Series Motorized Rotation Stages
Note .
• Even if a stage type and axis has been associated with the controller, it is still possible to
alter these parameters if required, (e.g. for a custom stage type not selectable using the
APT Config utility).
To associate the PRM1-Z7 stage with the TDC001 controller, proceed a follows:
Note
. For a complete instructions regarding the mechanical and electrical installation,
see the handbook supplied with the stage.
1) Connect the stage to the DC motor driver and power up the unit.
Fig. 4.1 TDC001 Rear Panel
2) Connect the driver to the control PC.
3) Shut down all applications using the APT server (e.g. APT User or your own
custom application).
4) Run the APT Config utility - Start/Programs/Thorlabs/APT Config/APT Config.
MOTOR