4.11
Stage/Axis Tab
This tab contains a number of parameters which are related to the physical
characteristics of the particular stage or actuator being driven. They need to be set
accordingly such that a particular stage is driven properly by the system.
Fig. 4.16 Stage/Axis Tab
These parameters were set automatically when the Z612 series actuator was
selected using the APTConfig utility in Section 4.2. The APT server automatically
applied suitable defaults for the parameters on this tab during boot up of any client
software such as APTUser. These parameters should not be altered for pre-defined
Thorlabs stages and actuators selected using APT Config, as it may adversely affect
the performance of the stage.
For third party stage types not available using the APT Config utility, these stage
details must be entered manually.
Individual parameters are described in Section 5.3.
