ODC001 Servo Motor Driver
2.2.2
Environmental Conditions
Warning. Operation outside the following environmental limits may adversely affect
operator safety.
Location
Indoor use only
Maximum altitude
2000 m
Temperature range
5
o
C to 40
o
C
Maximum Humidity
Less than 80% RH (non-condensing) at 31°C
To ensure reliable operation the unit should not be exposed to corrosive agents or
excessive moisture, heat or dust.
If the unit has been stored at a low temperature or in an environment of high humidity,
it must be allowed to reach ambient conditions before being powered up.
2.2.3
Removing the Baseplate
The OptoDCDriver is supplied fitted with a baseplate, for securing the unit to an
optical table or breadboard. If desired, this baseplate can be removed, and the unit
placed freestanding on the worksurface.
Fig. 2.2 Removing The Baseplate
1) Invert the unit and remove the screws securing the baseplate to the bottom face.
Retain the screws for future use if the baseplate is refitted.
2) Fit the shorter screws (supplied), to secure the internal circuitry to the outer case.
3) The unit may now be used freestanding, sitting on its rubber feet.
Detail A - showing baseplate attachment
screws and short screws supplied separately
Detail B - showing baseplate removed
and short screws fitted
