MTS25-Z8 and MTS50-Z8 DC Motorized Translation Stages
Page 6
19593-D02
1
4
2
4
3.2.4 Fitting and Removing the Base Plate
Referring to Fig. 3.3, proceed as follows:
1) Fit the dowels supplied to the base plate (MTS25A-Z8 or MTS50A-Z8).
2) Position the stage on the base plate, ensuring that the dowels locate correctly in
the holes in the lower surface of the stage.
3) Fit the four bolts supplied M3 x 10 (4-40 x 1/2”) through the holes in the underside
of the base plate, and tighten to secure the stage in place.
Fig. 3.3 Fitting the MTS25A-Z8 Base Plate
4) Fit two of the bolts supplied M6 x 10 (1/4-20 x 3/8”) through each end of the base
plate to fix the stage to the work surface.
5) To remove the base plate, reverse the procedure above.
3
