THORLABS MPH16-UC, Руководство пользователя

Страница: 10 / 43

Chapter 4 Getting Started
4.1. Unpacking and Inspection
Open the package, and carefully remove the MPH16-UC and its accessories.
The table lists the standard accessories shipped with the device.
Name Quantity
Motorized Pinhole Wheel 1
USB Cable 1
Power Supply 1
Hex L-Key 1.5 mm 1
Socket Head Cap Screw (to Mount Cage Rods) 4
Dovetail Adapter for 30 mm Cage System Compatibility
1
User Guide 1
Inspect the device and its accessories for any missing parts or damage.
If there is any problem, please contact Thorlabs at Phone: 973-300-3000 or
Email: techsupport@thorlabs.com immediately. Please have the serial num-
ber (printed on the side of the unit) available while calling the technical support
team.
4.2. Setting up MPH16-UC
4.2.1. Minimum Computer Requirements
Operating System
64-bit, Windows 7 or 10 (Not Compatible with 32 bit)
Driver
Silicon Labs CP210x USB to UART Bridge
Other Software
Visual C++ Redistributable Package (2012),
Microsoft .NET 4.5.2 or Later
4.2.2. Preparation
1.
Install the MPH16 software on your computer as described in the
Software Chapter on page 9 .
2.
Mount the MPH16-UC unit on a breadboard or optical table.
3.
Remove the protective film from the unit.
4.
Connect the MPH16-UC to the computer via USB.
Page 6 TTN202954-D02
Motorized Pinhole Wheel, Uncoated Chapter 4: Getting Started