THORLABS K-Cube KLC101, Руководство пользователя

Страница: 6 / 28

K-Cube
™ Liquid Crystal Controller
Chapter 1: Safety
Rev A, September 11, 2020 Page 1
Chapter 1
Safety
1.1. Safety Information
For the continuing safety of the operators of this equipment, and the protection of the equipment
itself, the operator should take note of the
Warnings, Cautions, and Notes throughout this
handbook and, where visible, on the product itself. The following safety symbols may be used
throughout the handbook and on the equipment itself.
Warning: Risk of Electrical Shock
Given when there is a risk of injury from electrical shock
CAUTION
Caution is given when there is a possibility of damage to the product.
WARNING
Given when there is a risk of injury to users.
1.2. General Warnings
WARNING
If this equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment maybe impaired. In particular, excessive moisture may impair operation. In any
installation that uses the KLC
101 it is the user’s responsibility to ensure adequate insulation and
precautions are taken to avoid shock risk.Spillage of fluid, such as sample solutions, should be
avoided. If spillage does occur, clean up immediately using absorbant tissue. Do not allow spilled
fluid to enter the internal mechanism.