THORLABS K-Cube KLC101, Руководство пользователя

Страница: 11 / 28

K-Cube
™ Liquid Crystal Controller
Chapter 3: Getting Started
Page 6 CTN014867-D02
3.2.3. Using the Baseplate
The baseplate must be bolted to the worksurface before the K-Cube is fitted, as shown below. The K-cube
is then placed on two dowels in the baseplate and secured by two clips.
Figure 4 Using The Baseplate
3.3. Electrical Installation
3.3.1. Rear Panel
Figure 5 Rear Panel Connections
MOD IN (SMA Female Connector) - external analog signal input, 0~+5 V DC;
AUX (8 Position Circular Connector) - Reserved for future use
OUTPUT (BNC Female Connector) - controller voltage output to driver Liquid Crystal Retarders, 0~+/-25 V
RMS.
3.3.2. Supply Voltage and Current Requirements
Supply Minimum Maximum Max Operating
Current
+5V +4.9V +5.1V 350 mA
+15V +14.5V +15.5V 220 mA
-15V -14.5V -15.5V 50 mA