INTUN Tunable Laser
12372-D02, 12/15/2007
Page 30
www.thorlabs.com
Signal Connector
The signal connector on the INTUN TL-T is a dual-row, 40-pin, male connector (Honda Part Number
RPS-40RLMG1). The mating connector is a dual-row female IDC connector for ribbon cable (Honda
Part Number RPS-D40RFBG1). The cable for the mating connector is a 40-way ribbon cable with a
pitch of 0.025" (0.635 mm). Thorlabs recommends 30 AWG (7/38 AWG) (Amphenol Spectra Strip Part
Number 191.3005.040).
4.3. Optical
Interface
Shutter
The optical port is protected by a mechanical shutter.
Beam
The beam exiting the INTUN TL-T is collimated with a diameter of less than 5 mm.
30 mm Cage System
The INTUN TL-T is equipped with four threaded #4-40 holes, allowing for easy integration into a 30
mm cage system from Thorlabs. Fiber coupling is normally done using the cage system.
SM1 Thread
The INTUN TL-T is equipped with SM1 threading on the optical exit port, thus enabling seamless
integration into a Thorlabs SM1 lens tube system.
