THORLABS ELL9, Руководство по эксплуатации

Страница: 6 / 22

ELL9K Four-Position Slider Evaluation Kit Chapter 3: Installation
Page 4 DTN000391-D02
Mounting
Warning
The safety of any system incorporating this equipment is the responsibility of the person performing the installation.
Cautions
Although the module can tolerate up to 8kV of air discharge, it must be treated as an ESD sensitive device. When
handling the device, anti-static precautions must be taken and suitable discharge appliances must be worn.
When handling the stage, take care not to touch the wires to the motors.
Do not bend the wires over the motor spring as this affects the performance of the unit.
Do not allow the wires to contact other moving parts.
Do not move the stage by hand. Doing so will disorientate the motors and cause the unit to fail.
The recommended mounting orientation is vertically, with the motors at the bottom of the board as shown below. In this
orientation, optic position 0 is on the right hand side.
Figure 1 ELL9 Four-Position Optic Slider