THORLABS ELL9 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 22

background image

ELL9K Four-Position Slider Evaluation Kit

Chapter 8: Thorlabs Worldwide Contacts

Rev. C, Feb 2020

Page 19

Chapter 8

Thorlabs Worldwide Contacts

For technical support or sales inquiries, please visit us at

www.thorlabs.com/contact

for our most up-to-date contact

information.

Thorlabs verifies our compliance with the WEEE (Waste Electrical and Electronic Equipment) directive of the European
Community and the corresponding national laws. Accordingly, all end users in the EC may return “end of
life” Annex I category electrical and electronic equipment sold after August 13, 2005 to Thorlabs, without
incurring disposal charges. Eligible units are marked with the crossed out “wheelie bin” logo (see right),
were sold to and are currently owned by a company or institute within the EC, and are not dissembled or
contaminated. Contact Thorlabs for more information. Waste treatment is your own responsibility. “End
of life” units must be returned to Thorlabs or handed to a company specializing in waste recovery. Do not
dispose of the unit in a litter bin or at a public waste disposal site.

USA, Canada, and South America

Thorlabs, Inc.
[email protected]
[email protected]

UK and Ireland

Thorlabs Ltd.
[email protected]
[email protected]

Europe

Thorlabs GmbH

[email protected]

Scandinavia

Thorlabs Sweden AB
[email protected]

France

Thorlabs SAS

[email protected]

Brazil

Thorlabs Vendas de Fotônicos Ltda.
[email protected]

Japan

Thorlabs Japan, Inc.
[email protected]

China

Thorlabs China
[email protected]

Annex I

«
...
19
20
21
22
»

Содержание ELL9























Отзывы:

Нет отзывов

Похожие инструкции для ELL9

Бренд: Xilinx Страницы: 23

Бренд: Xilinx Страницы: 60

Бренд: Xilinx Страницы: 41

Zynq UltraScale+ ZCU104

Бренд: Xilinx Страницы: 92

Zynq UltraScale+ ZCU104

Бренд: Xilinx Страницы: 4

Spartan-3A DSP FPGA Series

Бренд: Xilinx Страницы: 10

Бренд: Xilinx Страницы: 92

Бренд: Gan Systems Страницы: 24

Бренд: Avalue Technology Страницы: 12

Бренд: MIPS Страницы: 10

Бренд: Texas Instruments Страницы: 8

Бренд: Microchip Technology Страницы: 17

Z270 Gaming Pro Carbon Motherboard

Бренд: MSI Страницы: 92

Бренд: Linear Technology Страницы: 10

Бренд: Aaeon Страницы: 120

Бренд: MSI Страницы: 30

7001G - VIA Mini ITX Motherboard

Бренд: VIA Technologies Страницы: 76

Бренд: Gigabyte Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды