THORLABS DC2200, Руководство по эксплуатации

Страница: 7 / 78

© 2020 Thorlabs GmbH
1 General Information
5
1.1 Safety
Attention
The safety of any system incorporating the equipment is the responsibility of the assembler of
the system.
All statements regarding safety of operation and technical data in this instruction manual will
only apply when the unit is operated correctly as it was designed for.
The DC2200 must not be operated in explosion endangered environments!
Do not obstruct the air ventilation slots in the housing! Do not remove covers or open the cab-
inet!
There are no parts serviceable by the operator inside!
Keep in mind, that High Power LEDs may get hot!
This precision device is only serviceable if properly packed into the complete original packaging
including the plastic foam sleeves. If necessary, ask for replacement packaging.
Refer servicing to qualified personnel!
Only with written consent from Thorlabs GmbH may changes to single components be made or
components not supplied by Thorlabs GmbH be used.
Attention
Prior to applying power to the DC2200, make sure that the protective conductor of the 3 con-
ductor mains power cord is correctly connected to the protective earth ground contact of the
socket outlet! Improper grounding can cause electric shock resulting in damage to your health
or even death!
All modules must only be operated with duly shielded connection cables.
Attention
The following statement applies to the products covered in this manual, unless otherwise spe-
cified herein. The statement for other products will appear in the respective accompanying doc-
umentation.
Note This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules and meets all requirements of the Canadian Inter-
ference-Causing Equipment Standard ICES-003 for digital apparatus. These limits are de-
signed to provide reasonable protection against harmful interference when the equipment is op-
erated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residen-
tial area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Users that change or modify the product described in this manual in a way not expressly ap-
proved by Thorlabs GmbH (party responsible for compliance) could void the user’s authority to
operate the equipment.
Thorlabs GmbH is not responsible for any radio television interference caused by modifications
of this equipment or the substitution or attachment of connecting cables and equipment other
than those specified by Thorlabs GmbH. The correction of interference caused by such unau-
thorized modification, substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all op-
tional peripheral or host devices. Failure to do so may violate FCC and ICES rules.