THORLABS DC2200, Руководство по эксплуатации

Страница: 47 / 78

© 2020 Thorlabs GmbH
4 Write Your Own Application
45
OUTPut subsystem commands
Command Description SCPI
OUTPut[1] Path to OUTPut subsystem Vol.2 §15
[:STATe] {ON|1|OFF|0} Enables (ON) or disables (OFF) LED output Vol.2 §15.12
[:STATe]? Returns output state Vol.2 §15.12
:TERMinal {1|2} Select output terminal: 1 = 10A/12Pin connector
(LED1); 2 = 2A/4Pin connector (LED2);
:TERMinal? Returns selected output terminal
:TERMinal:ABORt Abort any running LED head presence test
:TERMinal{[1]|2}
:TEST Testing presence and properties of LEDs
[:INITiate] Initiate presence test procedure on the specified ter-
minal
:STATus? Query status of the presence test procedure as an
<NF1> value:
0 = The presence test procedure is running
1 = The latest presence test detected no LED
2 = The latest presence test detected a custom LED
without onboard head info memory
3 = The latest presence test detected a LED head
with onboard head info memory
:PROTection
:INTLock[:TRIPped]? Returns interlock circuit protection tripped (1) or un-
tripped (0)
:TEMPerature
[:DRIVer][:TRIPped]? Returns driver (console) over temperature protection
tripped tripped (1) or untripped (0)
:HEAD[:TRIPped]? Returns head over temperature protection tripped
tripped (1) or untripped (0)
SENSe3 LED current sensing subsystem commands
Command Description SCPI
SENSe3
Path to LED current sensing
[:CURRent][:DC]
[:DATA]? [{MIN|MAX}] Returns the measured LED current. Parameters MIN
and MAX return the measurement value range pos-
sible in the currently active driver configuration (de-
pends on the compliance voltage required by the
LED head)
SENSe4 LED voltage sensing subsystem commands
Command Description SCPI
SENSe4 Path to LED voltage sensing
[:VOLTage][:DC]
[:DATA]? [{MIN|MAX}] Returns the measured LED voltage. Parameters MIN
and MAX return the measurement value range pos-
sible.
SENSe5 LED temperature sensing subsystem commands
Command Description SCPI
SENSe5 Path to LED temperature sensing
[:TEMPerature]? [{MIN|MAX}] Returns the measured LED temperature. Parameters
MIN and MAX return the measurement value range
possible.