Save Data Screen
The Save Data Screen (
Figure 17
) allows users to change the status of and the
rate at which events are recorded on the System Monitor data logger and
System Controller event recorder. It is also used to save waveforms with motor
performance or information stored in the System Controller event recorder to a
data card.
The System Monitor data logger collects and stores system performance data at
a set time interval directly onto a data card inserted into the side of the System
Monitor. The status indicator (
Figure 17
) specifies whether the logging feature
is on or off. The logging rate indicator specifies the frequency with which data
is collected and stored to the data card. Frequency options are 15 seconds, 30
seconds, and one minute intervals from 1 to 60 minutes. The data logger auto-
matically turns off when the patient is disconnected from the PBU and must be
turned back on when the patient is reconnected.
The System Controller event recorder is a feature built into the System
Controller that allows performance data to be collected and stored in the
System Controller’s memory. This memory capacity is capable of storing 120
events; and, once it becomes full, the oldest events are deleted as new ones are
saved. Events may be recorded in one of two ways:
1)
As events occur
: The System Controller will automatically record any
alarm or change in fixed speed as it occurs. Therefore, the status indicator
in the Controller event recorder box (
Figure 17
) will always specify that the
recording feature is on.
CLINICAL OPERATION AND PATIENT MANAGEMENT
23
Figure 17
Sample Save Data Screen
Содержание HeartMate II LVAS
