Thor Motor Coach CLASS B, Руководство пользователя

Страница: 109 / 116

105
12
M A I N T E N A N C E S C H E D U L E
T H O R M O T O R C O A C H | M A D E T O F I T
ITEM
EVER
Y TRIP
EVER
Y
MONTH
EVER
Y 3
MONTHS EVER
Y 6
MONTHS
EVER
Y YEAR
PRIOR T
O
ST
ORAGE
AS REQUIRED
PROCEDURE TO BE PERFORMED:
Maintenance schedules are minimum requirements. Heavy
use, unusual temperatures or humidity, or other extreme
conditions may require more frequent maintenance.
Awning x x Operate awnings to ensure proper functioning.
x x Clean awning fabric with warm water and mild detergent. Allow
fabric to dry before retracting. Lubricate hinges and joints with
silicone grease.
Stabilizers: electric
(if installed)
x x Ensure stabilizers deploy properly and fully retract. Clean
deployment mechanism with mild detergent and rinse with water.
Lightly lubricate as needed. Inspect jack pads for damage. Replace
worn or damaged components as needed.
Cab/Cockpit x x Vehicle horn: test for proper function, repair if defective.
x x Gauges and switches: ensure all vehicle control functions and
driver aids are in proper working order before every trip. Repair and
replace as needed.
x Cockpit seating: lubricate mechanisms, repair or replace damaged
seats or seating components.
x Inspect heater and air conditioner for proper function. Repair as
necessary.
Electrical System:
12 volt
x x Check and service auxiliary and chassis battery(ies). Add ONLY
distilled water as needed or replace batteries that fail to hold a charge.
Do not attempt to open maintenance-free batteries. Keep batteries on
trickle charge when stored for an extended period of time.
x x Check battery charging system: chassis alternator, inverter/
converter, solar controller. Ensure proper charging voltage
via multimeter reading (battery manufacturers charging
recommendations).
x x Multiplex system (if installed): check using ‘Hot Skin Test’; with a
multimeter set to 12 volts, place one probe on main panel and one
probe to a known ground. There should be no voltage. If voltage is
present, have multiplex system inspected by a qualified technician.
x x Interior 12 volt lighting: repair and replace as needed.
x Check 12 volt power plugs, USB ports and electronic device
charging stations. Repair or replace as needed.
x x Inspect automatic transfer switch (ATC), inverter, and converter for
proper function. Replace fuses or faulty circuit breakers.
x x Inspect radio, navigation, and camera monitoring system. Repair
as needed.
x x Inspect towing electrical plug (4-way or 7-way). Apply electrical
contact spray or electrical contact grease to contact surfaces.
x Solar panels (if installed): clean solar panels with water spray and
soft cloth (do not use detergents or abrasive cleaners).
x x Periodically check for BM Pro multiplex software and firmware up -
dates. Follow manufacturer’s instructions for downloads.
x x x If equipped, inspect the lithium battery power system for signs of
wear, overheating, frayed wires, or fatigue. Consult the manufactur-
er’s manual for maintenance details.