November 13th 2017
www.thonk.co.uk
9
Spring Reverb Mk ii
(November 2017 onwards)
Eurorack DIY Kit
Instructions
Version 1.00
21.
Next find the square blue
10K
trimmer
and solder into the position
shown on the
FRONT PCB
22.
Return to the cap bag and find the
five
10uF electrolytic caps.
Make
sure to identify the different caps by
the value written on them!
Just take
three
of them for now and solder
into positions
C101
,
C102
,
C103
on
the
BACK PCB
NOTE!
The orientation is vital, the
shorter lead on the component
should go to the circular pad
marked with a minus ‘-‘ on the PCB.
Note the component has a grey
stripe on the cylindrical body on the
minus side.
23.
Now grab the remaining two
10uF
electrolytic caps
and solder into
positions
C1
and
C2
on the
FRONT
PCB
NOTE!
The orientation is vital, the
LONGER lead on the component
should go to the square pad
marked with a plus ‘+‘ on the PCB.
The grey stripe on the cylindrical
body should face the
center
of the
FRONT PCB
THESE CAPS ARE MARKED
DIFFERENTLY - With a PLUS
sign!