November 13th 2017
www.thonk.co.uk
14
Spring Reverb Mk ii
(November 2017 onwards)
Eurorack DIY Kit
Instructions
Version 1.00
36.
Affix the hex post to the
REAR PCB
with one of the M3 screws
provided.
37.
Now you will sandwich the two
PCBs together like so, mating the
male and female headers.
Secure the hex post with another
M3 screw to hold the boards
together.
38.
If you are not installing the expander
you need to position the red shunt
on the 3 pin expander header. This
chooses either the external real
spring tank OR the digital brick
attached to the back of the module.
The expander allows you to blend
and crossfade between the real
tank and digital brick to dial in a
Custom response.
Attach the shunt even if you ARE
attaching the expander as you
should test the main module
without the expander first.
FOR DIGITAL FOR REAL SPRING
BRICK TANK
(ON RCA
CONNECTION)