manualshive.com logo in svg

THOMSON VK231PS, Техническое руководство

Поделиться
Скачать
THOMSON VK231PS Скачать руководство пользователя страница 39

35

REASSEMBLY

- Place the loading arm and tape tensioning arm in unloaded tape position.
- Align Guide Hole H2 of Rod 24 with the hole in the chassis.
- Install the control cam by aligning its guide hole (H1) with the hole in the chassis.
- Reinstall the capstan idler by inserting its control tappet in the first cam groove from the axle.
- Reinstall the lever (25) by inserting its tappet in the second cam groove from the axle.
- Reinstall the slide (40).  Pay attention to the tape tensioning arm return lever;  place its control

tappet in the slot in the slide. Bring the slide over to the left.

- Reinstall the spring (39).
- Reinstall the drive axle (14), and tilt forward.
- Reinstall the drive axle (14) gear, and align as shown below.

A

Marking hole H2

Right gear 
shaft 14

Arm 24

Align

Mark

Содержание VK231PS












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды