THOMSON Speedtouch 600 Series, Руководство по эксплуатации

Страница: 43 / 78

3 The SpeedTouch™610 Web Interface
E-SIT-CTC-20030306-0004 v2.0
39
•
Define a default server:
By specifying a default server IP address (e.g. 10.0.0.3 as depicted above), all
incoming connections that don’t match a specifically configured static NAPT entry
will be forwarded to the device with this IP address. In most cases this setting
should be adequate for most server applications and eliminates the need for
specific static NAPT entries.
• Configure Universal Plug and Play (UPnP):
The three UPnP configurations are:
•
Full
The SpeedTouch™ is UPnP enabled, all local hosts are able to detect the
SpeedTouch™. Any local host is able to create port mappings for any local
device.
• Secure
The SpeedTouch™ is UPnP enabled, all local hosts are able to detect the
SpeedTouch™. A local host is allowed to make port mappings for its own,
i.e. a local host is not allowed to create port mappings for other local
devices.
•
Off
The SpeedTouch™ is UPnP disabled, none of the local hosts is able to detect
the SpeedTouch™. Via UPnP no port mappings can be created.
For more information, see the application notes “The SpeedTouch™ and Network
Address Translation” and “The SpeedTouch™ and Universal Plug and Play”.