THOMSON Speedtouch 600 Series, Руководство по эксплуатации

Страница: 41 / 78

3 The SpeedTouch™610 Web Interface
E-SIT-CTC-20030306-0004 v2.0
37
RIP
Click this link to display the Routing Information Protocol (RIP) page.
This page allows you to:
• View or configure the SpeedTouch™610's general RIP configuration:
Via the RIP Settings tab you can enable/disable the master RIP daemon and specify
which RIP version should be used. Additionally you can set the default metric and
some RIP timer settings.
•
View or configure the RIP configuration per interface:
Per interface you can:
• Override the master RIP status (enable/disable)
•
Override the master RIP version, separately for receiving and sending RIP
messages
• Specify whether authorization is needed or not, and if so the required autho-
rization string
•
Specify whether the scope of RIP on this interface should be narrowed to
the applicable IP range.
• Define one or more RIP neighbors in case multicast messages can not be sent or
received among the network
Do not forget to save your changes to persistent memory by clicking Save All .