THOMSON ROC 740 Скачать руководство пользователя страница 10

Страница: 10 / 104

1. Press the

SET UP

key (

) until “

Setup

“ displays on the LCD panel.

2. Release the

SET UP

key.

3. Press once again on the

SET UP

key. “

Time

“ will display on the LCD panel.

The day display will blink.

4. Press the

FFWD

key (

) to advance, or the

REV

(

) to go back until the correct day displays:

“

“ for Monday, “

“ for Tuesday, “

“ for Wednesday, “

“ for Thursday,

“

“ for Friday, “

“ for Saturday and “

“ for Sunday.

5. Press briefly on

(

) to validate. The hours display will now blink.

6. Choose the correct hour using the

FFWD

(

) or

REV

(

) keys to obtain the right hour,

then briefly press

(

) to validate. The minutes display will now blink.

7. Choose the correct minute using the

FFWD

(

) or

REV

(

) keys to obtain the right minute,

then briefly press

(

) to validate.

8. Setting is now finished: the display will now show the day, hour and minute settings you chose.

The code list for various current household items you can control is delivered separately from the

ROC

740

. Read the code list to obtain

the one or more codes that you can use for controlling the equipment you want. Then utilize the following procedure:

1. Keep the

SET UP

(

) key pressed until “

Setup

“ displays on the LCD panel.

2. Release the

SET UP

key.

3. Press briefly on that key for the mode you want (

VCR

SAT

, etc...).

For

AUX

mode press briefly on the

AUX

keys, then on the desired

mode key (

VCR

SAT

, etc...).

4. Enter the first code listed for the concerned equipment item.

(For example

016

for a Thomson TV set).

If the code is incorrect “

Invalid

“

will display for a few seconds.

Check the code you used from the code list and try again from Step 4.

5. When you have the right code the day and time will display, confirming your choice.
6. Entry of the equipment item code is now finished.

Note: When the list shows several equipment item codes for the same manufacturer this indicates that some codes in the list cover more

equipment control functions than other codes listed (this also depends on the year the concerned item was first sold). In such case and

after having entered a code, try to remote operate your equipment using the various function keys of your

ROC

740

. This will enable

you to find out which functions can be controlled using a particular code. If you cannot operate all available functions, enter another

code from the list. Where you do not find any utilizable code under the equipment manufacturer’s name you will have to make a code
search

(see following paragraph), or load the right codes for each function from the original remote controller for your equipment

item using the learning function (page 5).

If you were not able to find the right code for your equipment item in the separately available code list you can make a search for it,
proceeding as follows:

1. Turn on the equipment item you want to remote control using the front panel controls (On/Off switch or Standby switch).
2. Press the

SET UP

(

) key until “

Setup

“ displays.

3. Release the

SET UP

key.

4. Press

SET UP

briefly for the mode you require (

VCR

SAT

, etc...).

For the

AUX

, mode briefly press either of the

AUX

keys then that for the mode

you want (

VCR

SAT

, etc...).

5. Press several times on the

PROG

key (

) until the equipment item you wan to

control reacts, eg. by changing the channel selection. The display will show “

“

as well as the mode and the code you are trying out. Do not proceed too fast between each
code you test to allow the equipment time for data interchange. If you went too fast and want
to return you can use the

REV

key (

) to move back to a previous setting.

6. Press briefly on the

key to store the equipment item code you select.

It may be useful to note the right code for later use.

When you change the batteries it may be necessary to reprogram the remote control.

7. Code search is now finished. The LCD panel will indicate the day and time.

Note: if the original item’s remote control does not have a key with a function similar to the

PROG

key for ‘zapping’ or rapid channel

scrolling, you can make code search by using the

PLAY

key for a VCR or the

key (

)

Code search will start with the last-stored code for the mode currently selected, for example if that mode has 100 codes and the stored

code is 050 code search will start at 051 and range to 100, then restart from 000 through 050. This will ease your code selection task

where several codes apply to your equipment item, by skipping any codes already tested.

After code search and when you manually select the code you must be sure you selected the right code, that one or ones giving control

of all equipment item functions. Where you find that certain functions are still not able to be remote controlled because no code allows

you to reproduce all capacities of the item’s original remote control, your

ROC

740

can load the missing functions through its learning

mode.

Setting date and time

Storage of listed codes in memory

Code search

Programming the remote control for a COMBO breaks down to programming it once as a TV, and a second time as a VCR, these being
the two main functions of a COMBO.
Before starting to program, find the right codes for the TV and the VCR functions of your COMBO, then follow the procedure in “S

torage

of listed codes in memory

” in the previous paragraph.

Programming control for a COMBO (combined TV/VCR)

Setup

Mode ?

Setup

Mode ?

Time
Fr

12:48

Setup

016