THOMSON ROC 740, Руководство пользователя

Страница: 12 / 104

GB
5
Always place the two remote controls facing each other with their IR-emitting panels close to each other and aligned (see diagram).
1. Press the
SET UP
key (
17
) until you get the “
Setup
“ display on the LCD display.
2. Release the
SET UP
key.
3. Press several times on the
SET UP
key until “
Learn
“ displays.
4. Press the mode key (
TV
,
VCR
,
SAT
, etc...) for the remote control function on the original
item’s remote control that you want to download. “
Key ?
“ will then display on the LCD
panel of your
ROC 740 .
5. Press any key (eg.
1 ),
giving the display “
Learn
“, and the
ROC 740
will now “copy“
the code for that key function from the item’s original remote control (to make a “Shift“
to another function first press the
S
key).
Do not program the mode keys (
TV
,
VCR
,
SAT
, ...) and the
SET UP
keys.
6. Keep the key (
1
in the above example) of your item’s original remote control pressed for a
few seconds to transfer and store its correct code to your
ROC 740
. The LCD panel will display
“
Key ?
“ if the correct code has been stored in your
ROC 740
.
If you get the display “
Error
“ this indicates the transfer failed. In such case repeat
procedures 5 and 6, above.
7. Repeat procedures 5 and 6 until all the key functions to download are stored in your
ROC 740
.
8. When you have finished all downloading press the -/-- key (
27
).
9. You have now finished downloading, your
ROC 740
will display the day and time.
If you want to download another remote control, for example under “TV“, you can erase all previous controlled functions and key
settings learnt for that particular mode.
1. Hold down the
SET UP
key (
17
) until “
Setup
“ displays on the LCD panel.
2. Release the
SET UP
key.
3. Press the
SET UP
key several times until “
Clear
“ (erase) displays.
4. Press the mode key (
TV
,
VCR
,
SAT
, etc...) for the equipment item whose function
codes you want to erase and then validate by
OK
.
5. This will erase all stored controls in that mode.
6. Erasure is now finished. Your
ROC
740
will display the day and time.
Before programming your
ROC 740
the first time make sure any stored codes have been erased, in order to have the remote control
ready to initialize.
1. Hold down the
SET UP
key (
17
) until “
Setup
“ displays on the LCD panel.
2. Release the
SET UP
key.
3. Press the
SET UP
key several times until “
Reset
“ displays.
4. Press briefly on the
OK
key and “
Confirm
“ will display.
5. Make another validation with the
OK
key.
6. Your
ROC 740
is now reset and will display the day and time.
How does this work?
Where you cannot find the right code for your equipment item, or one does not exist in the separately-supplied list, you can have your
ROC 740
learn the functions controlled and commanded by the original item’s remote control, by way of the equipment mode (
TV
,
VCR
,
SAT
,...) you want to operate. To do this you download key function one-by-one to your
ROC 740
allowing you to assign control functions
to keys as you wish.
Your
ROC 740
can learn up to 3 different remote controls having up to 50 keys each. In order that utilization is not too complicated we
recommend you only memorize one only remote control operation to be called by each mode key (
TV
,
VCR
,
SAT
,...). If you have already
entered an equipment item code under a certain mode you can add other function controls by using other non-assigned keys on your
ROC
740 .
Before starting:
1. Make sure your
ROC 740
and the equipment item’s original remote control both have new batteries and that the room you are in
is not lit by neon tube or energy-saving lamps. Emissions from such lighting will interfere with the download operation.
2. Erase any existing codes by a reset. Follow the instructions on Page 5.
3. Place the 2 remote controls on a flat surface, facing each other and less than 5 cms (2 inches) apart. Make sure the infrared-
emitting surfaces of the 2 remote controls are directly facing each other (see diagram).
4. Start by downloading 2 or 3 key function controls from the item’s original remote control and then check that your
ROC 740
has
learned them, by trying it out with the item. If this was OK, proceed to downloading the other key functions you want from the
item’s original remote control.
Note: When the memory is saturated “
Full
“
will blink on the display for a few seconds. At such time you cannot download other key
functions, unless you re-assign those key functions you already downloaded. If you try to download a prohibited 4th remote control
you will get the display:‘“
Error
“.
It can take a few seconds to download each key function control. Make sure you keep the key you are downloading from the original
item’s remote control firmly pressed, until you get the display “
Ok
“ on your
ROC 740
’s LCD panel.
Learning function
Code downloading from other remote controls
Erasing codes for any particular mode (TV, VCR, SAT, etc.)
Erasure of all stored codes (reset)
V
C
R
S
A
T
T
V
O
N B
A
U
D
IO
PA
U
S
E
S
T
O
P
P L
A
Y
F
F W
D M
2
M
1
E
X
IT
M
E
N
U R
E
W
S E
T
U
P
R
E
C
O
R
D
A
U
X
1
A
U
X
2
D
V
D
C
D
Setup
Mode ?
Learn
Mode ?
Learn
TV
Key ?
TV
Clear
Mode?
Setup
Mode ?
Reset
Fr 12:48
Roc740_GB 25/04/01 16:05 Page 5