Installation and Operating Manual
Stratotimer ST3
REMOVAL / INSTALLATION
Revision: 1.00
12/06/2020
31-20-01
Page 403
2. Installation
2.1 References
REFERENCE
ITEM
Aircraft Maintenance Manual (AMM)
Chapter 24, Electrical Power
2.2 Special Tools and Equipment
REFERENCE
ITEM
8500-001
Installation Kit 3ATI - 26 pin (optional supply)
(consisting of clamp (square style) 3ATI and 26 pin
mounting connector)
2.3 Consumable Materials
None
2.4 Expendable Parts
None
2.5 Preparation
Refer to Figure 401.
(1) Refer to Installation Considerations (Maintenance Practices, page block 201) for
pre-installation instructions.
(2) Make sure that the work area is clean and clear of unwanted parts and materials.
(3) Make sure that the applicable circuit breaker is open and tagged (ref. AMM,
Chapter 24).
(4) If necessary, install the 3ATI clamp (2) (optional supply, refer to Special Tools and
Equipment, above).
(5) If necessary, install the 26-pin connector to the aircraft electrical wiring (optional supply,
refer to Special Tools and Equipment, above). For pin assignments, refer to Description
and Operation (page block 1), Electrical and Display Characteristics (section 3.5).
(6) Clean the inside surfaces of the 3ATI clamp (2) and the mating surface of the housing
of the Stratotimer ST3 (1) in accordance with the applicable aircraft procedures to
ensure good electrical conductivity for grounding.
Содержание STRATOTIMER ST3
Страница 3: ......
