Figure 13
Finishing
the
Fan
Installation
STANDARD CELING MOUNTING
1.
Carefully lift the canopy up to the
mounting plate . Make sure the tab in
the ring at the bottom of the canopy is
properly seated in the groove in the
hanger ball. Align the locking slots of
the ceiling canopy with the two screws
in the mounting plate. Push up to
engage the slots and turn clockwise to
lock in place. Immediately tighten the
two mounting screws firmly.
2.
Install the remaining two mounting
screws into the holes in the canopy and
tighten firmly.
3.
Install the decorative canopy ring
by aligning the ring’s slots with the
screws in the canopy. Rotate the ring
counter-clockwise to lock in place.
4. You may now proceed to attaching
the fan blades
.
CLOSE-TO-CEILING MOUNTING
1.
Carefully unhook the fan from the
mounting plate and align the locking
slots of the ceiling canopy with the two
screws in the mounting plate. Push up to
engage the slots and turn clockwise to
lock in place. Immediately tighten the
two mounting screws firmly.
2.
Install the remaining two mounting
screws into the holes in the canopy and
tighten firmly.
3.
Install the decorative canopy ring
by aligning the ring’s slots with the
screws in the canopy. Rotate the ring
counter-clockwise to lock in place.
4.
You may now proceed to attaching
the fan blades.
WARNING
LOCKING
SLOTS
OF
CEILING
CANOPY ARE PROVIDED ONLY AS
AN AID TO MOUNTING. DO NOT
LEAVE
FAN
ASSEMBLY
UNATTENDED UNTIL ALL FOUR
CANOPY SCREWS ARE ENGAGED
AND FIRMLY TIGHTENED.
8.
