thomann stairville dj lase performance 150 RGY, Руководство пользователя

Страница: 35 / 56

Press [FUNC] repeatedly until the display shows and starts flashing. In this menu, the sen‐
sitivity and thus the response characteristic of the microphone is set. Use the [UP] and [DOWN]
buttons to select the settings ‘S 0’ (sensitivity = 0, operation mode ‘Sound-controlled’ is off) or
„S 1“ (low sensitivity) to „S 9“ (high sensitivity). Press [ENTER] to save the setting.
Press [FUNC] repeatedly until the display shows . Now you can adjust the number of the
first DMX channel (DMX address) used by the unit. Select a value between 1 and 512 using the
[UP] and [DOWN] buttons. Press [ENTER] to store the value and to start operation in DMX mode.
Make sure that this number corresponds with the configuration of your DMX controller.
Press [FUNC] repeatedly until the display shows . In this operation mode the unit follows
exactly the master device that it is connected to. Press [ENTER] to confirm and to start opera‐
tion in ‘Master/Slave’ mode.
Response characteristic
Operation mode ‘DMX’
Operation mode ‘Master/Slave’
Operation
DJ Lase 150-RGY MK-III
35