3
1. Safety Instruction
You have to read the instruction carefully, which includes
important information about the installation, operation and
maintenance.
•
Please keep this User Guide for future consultation. If you sell the unit
to another user, be sure that he also receives this instruction booklet
thus giving them the necessary information about the use and general
warnings regarding the unit.
•
Unpack and check carefully there is no transportation damage before
using the unit.
•
Before operating, ensure that the voltage and frequency of power supply
match the power requirements of the unit as stated in this manual.
•
It’s important to ground the yellow/green conductor to earth in order to
avoid electric shock.
•
The unit is for indoor use only. Use it only in a dry location. Exposing
the device to rain or moisture would cause the risk of electrical shock
or fire. Maximum ambient temperature is 40°C. Don’t operate it in
locations where the temperature is higher than this.
•
The unit must be installed in a location with adequate ventilation, at
least 50 cm from adjacent surfaces. Be sure that no ventilation slots are
blocked. The electrical work that is necessary for installation must done
by qualified personnel. Use safety cable when fixing this unit.
• Check the surrounding area and make sure there are no flammable liquids,
water or metal objects that could enter the fixture. If a foreign object or
substance enters the unit, immediately disconnect the mains power.
• Unit surface temperature may reach up to 85°C. Don’t touch the
housing bare-hand during its operation or shortly after. Turn off the
power and allow about 15 minutes for the unit to cool down before
replacing the bulb or serving.
• Disconnect the device from the mains power before any servicing or
maintenance.
•
In the event of serious operating problem, stop using the unit
immediately. Never try to repair the unit by yourself. Repairs carried out
by unskilled people can lead to damage or malfunction. Please contact
the nearest authorized technical assistance centre. Always use the
same type spare parts.
• There are no user serviceable parts inside the fixture. Do not open the
housing or attempt any repairs by yourself. If the fixture shows any visible
damage or in the unlikely event, that your fixture may require service,
please contact your nearest dealer. Always use genuine spare parts.
