5. ALARM SETTING
5.1 Setting the Alarm
This Clock possesses 2 daily alarms. To view the set alarm times toggle the switch or
switch to
ON
and the LCD display will show the alarm time.
Note: After 20 seconds without pressing any button, the clock switches automatically from
Set Mode to Normal Time Mode.
●
Press and hold down the
ALARM
button for 2 seconds until Alarm Time starts flashing
on the display.
●
The Hour display of the Alarm will start to flash. Use the
+
and
-
buttons to set the
required hour. Press the
ALARM
button to confirm your settings.
●
The Minute display of the Alarm will start to flash. Use the
+
and
-
buttons to set the
required minute. Press the
ALARM
button to confirm your settings.
●
The Hour display of the Alarm will start to flash. Use the
+
and
-
buttons to set the
required hour. Press the
ALARM
button to confirm your settings.
●
The Minute display of the Alarm will start to flash. Use the
+
and
-
buttons to set the
required minute. Press the
ALARM
button to confirm your settings and to end the alarm
setting procedure.
5.2 Activating and Deactivating the Alarm
7
●
To activate or deactivate the daily alarms, briefly toggle switch or switch .
5.3 Snooze Function
●
While the alarm is sounding, touch the button to activate snooze function.
When the snooze fuction is active the alarm icons or will flash on the display.
●
The snooze function moves the alarm back by 5 minutes and after this time it will sound
again.
●
To turn off the snooze function press and button on the projection clock.
●
If a snooze alarm is in process and another alarm is scheduled this will automatically
stop the snooze function and the set alarm will sound.
5.4 Stopping the Alarm
●
When the alarm is sounding press any button on the back, apart from the “SNZ” button,
to stop the alarm.
●
The alarm will stop sounding automatically after 2 minutes and will repear 24 hours later
at the set time.
●
The alarm is a rising alarm which changes volume 4 times whilst the alarm sounds.
