2. IMPORTANT INFORMATION
4
2.1 Battery Precautions
1. Alkaline batteries are recommended.
2. Incorrect use of batteries may cause damage, so please pay attention to the following:
●
Do not install batteries with opposite polarity.
●
When not in use and if the Projection Clock is not going to be used for a long time,
please remove the batteries to avoid corrosion.
●
Do not mix old and new batteries.
●
Please replace exhausted batteries as soon as possible.
●
Keep batteries away from children.
●
Do not place batteries near fires or expose them to strong sunlight or damp
conditions.
●
Please dispose of batteries carefully.
3. Careful with small parts, do not eat.
4. Do not place near fire, high temperature or damp conditions.
2.2 Battery Installation
●
Gently open the battery compartment located on the rear side of the unit.
●
Insert 2 X 1.5V AAA batteries observing the correct polarity, as marked inside the
compartment.
●
Replace the battery compartment door.
2.3 Reset Function
●
If the clock is not working properly or does not respond to your input remove all
batteries and power for 30 seconds.
●
This will reset the clock to factory defaults.