THine THCV245 A, Руководство пользователя

Страница: 60 / 67

Preliminary
THCV245A_Rev.0.90_E
Copyright©2020 THine Electronics, Inc. THine Electronics, Inc.
Security C
60/67
10 DC Specifications
10.1 CMOS DC Specifications
Table 58. CMOS DC Specifications
10.2 MIPI Receiver DC Specifications
Table 59. MIPI Receiver DC Specifications
Symbol Parameter Condition Min Typ Max Unit
IIH LVCMOS Input Leak Current High - - - 10 uA
IIL LVCMOS Input Leak Current Low - - - 10 uA
3.3V Drive 2 - VDDIO V
2.5V Drive 0.70*VDDIO - VDDIO V
1.8V Drive 0.65*VDDIO - VDDIO V
3.3V Drive 0 - 0.8 V
2.5V Drive 0 - 0.30*VDDIO V
1.8V Drive 0 - 0.35*VDDIO V
VOH LVCMOS High Level Output Voltage - VDDIO-0.45 - VDDIO V
VOL LVCMOS Low Level Output Voltage - 0 - 0.45 V
VIHIO
VILIO
LVCMOS High Level Input Voltage
LVCMOS Low Level Input Voltage
Symbol Parameter Condition Min Typ Max Unit
ILEAK mipi D-PHY pin Leak Current Pow erDow n -10 - 10 uA
Vcmrx(DC) mipi D-PHY Voltage input common Rx HS mode 70 200 330 mV
Vidth mipi D-PHY Voltage dif f. input high thres. HS mode - - 70 mV
Vidtl mipi D-PHY Voltage dif f. input low thres. HS mode -70 - - mV
Vihhs
mipi D-PHY Single-end. input high limit
at HS mode
HS mode - - 460 mV
Vilhs
mipi D-PHY Single-end. input low limit
at HS mode
HS mode -40 - - mV
Vterm-en
mipi D-PHY Single-ended threshold
for HS termination enable
HS mode - - 450 mV
Zid mipi D-PHY dif ferential input impedance HS mode 80 100 125 ohm
Vih mipi D-PHY Single-end input high thres. LP mode - - 880 mV
Vil mipi D-PHY Single-end input low thres. LP mode 550 - - mV